You Searched For: Bel-Art Products, a Part of SP

From controlling gas or liquid flow in tubing to providing the key piece for retort stand assembly, clamps are necessary parts for providing a controlled environment in any laboratory. Available in a variety of formats including the three-prong grip, bosshead, towel grip, and pinchcock, different designs fit specific functions. Manufactured with resistant finishes allow the adjustable clamps to withstand harsh testing conditions. These durable tools may fit specific equipment sizes or have a flexible sizing scale.

From controlling gas or liquid flow in tubing to providing the key piece for retort stand assembly, clamps are necessary parts for providing a controlled environment in any laboratory. Available in a variety of formats including the three-prong grip, bosshead, towel grip, and pinchcock, different designs fit specific functions. Manufactured with resistant finishes allow the adjustable clamps to withstand harsh testing conditions. These durable tools may fit specific equipment sizes or have a flexible sizing scale.


17  results were found

Sort Results

List View Easy View
SearchResultCount:"17"
Description: Strong, simple, and safe to use clamps that can be installed and removed without disconnecting tubing.
Catalog Number: 70690-124
Supplier: Bel-Art Products, a Part of SP


Description: Strong acetal plastic clamp with serrated jaws provides secure closure on tubing with a wall of.82 mm (1/32 ") or thinner.
Catalog Number: 70690-116
Supplier: Bel-Art Products, a Part of SP


Description: Accepts rods up to 13mm (1/2") diameter. Rods are held at right angles to one another with flat wing head clamping screws.
Catalog Number: 47750-928
Supplier: Bel-Art Products, a Part of SP


Description: Acetal clamp will not distort, rust or corrode, and features 15-position stepped control throttles that control flow from full open to complete closure. Clamp fits tubing from 3.2-11mm OD.
Catalog Number: 63022-405
Supplier: Bel-Art Products, a Part of SP

Description: Strong, open-jaw type nylon tubing clamp accepts any tubing up to 6.4mm (1/4") O.D. Angled jaws prevent tube from slipping out. 12 per bag, 12 bags per case.
Catalog Number: 70690-118
Supplier: Bel-Art Products, a Part of SP


Description: These non-corroding, polypropylene burette clamps do not obscure graduations. Burette is held firmly in place by rubber pads and a concealed steel spring. Center clamp tightens to a standard support rod; 12.5mm (1/2") and 9.5mm (3/8") bushings included. 12 per case.
Catalog Number: 13196-026
Supplier: Bel-Art Products, a Part of SP


Description: Polypropylene clip captures and holds flexible tubing firmly in place in beakers or other open containers. Fits snugly over the edge and has a 51mm (2in) long arm with a hole to accept tubing up to 9.5mm (3/8in) O.D. Autoclavable. 6 per bag.
Catalog Number: 47750-920
Supplier: Bel-Art Products, a Part of SP


Description: Acetal clamps will not distort, rust or corrode. Single position, on-off clamp is for use with thin walled tubing under 4.7mm OD. Clamps give positive shut-off with finger tip control.
Catalog Number: 63022-403
Supplier: Bel-Art Products, a Part of SP


Description: Accepts flexible tubing up to 14mm O.D. Tubing clamp offers on/off and fine control so accurately that it replaces stopcocks in many applications.
Catalog Number: 70680-322
Supplier: Bel-Art Products, a Part of SP


Description: Burette Clamp, Double
Catalog Number: 30617-624
Supplier: Bel-Art Products, a Part of SP


Description: Acetal clamp will not distort, rust, or corrode, and features 12-position ratchet control from full open to complete closure. Clamp is for tubing up to 19mm OD.
Catalog Number: 63022-407
Supplier: Bel-Art Products, a Part of SP

Description: This convenient holder clips onto the edge of a beaker or other vessel and holds a thermometer vertically near the side of the container for safe, easy reading.
Catalog Number: 70690-196
Supplier: Bel-Art Products, a Part of SP


Description: Strong, simple, and safe to use clamps that can be installed and removed without disconnecting tubing.
Catalog Number: 70690-120
Supplier: Bel-Art Products, a Part of SP


Description: Spring-action opening clamp with a flat wing-head screw for tightening. The stainless steel jaws are covered with rubber tubing and have an opening range of 0 to 25mm (1"). Overall clamp length is 22cm (9").
Catalog Number: 47750-930
Supplier: Bel-Art Products, a Part of SP


Description: Perfect for all flexible tubing, this positive-action, self-closing clamp opens by squeezing the handles together. Made of chemical and stain-resistant Delrin plastic and stainless steel.
Catalog Number: 63022-358
Supplier: Bel-Art Products, a Part of SP


Description: These individual clips neatly hold computer wires and tubing such as flexible vinyl, rubber, silicone, latex, polyurethane or Teflon used in pump lines, gravity flow lines and air flow lines.
Catalog Number: 63024-060
Supplier: Bel-Art Products, a Part of SP


1 - 16 of 17