Fully flexible drive shaft connects your stirring motor to any size or type of reactor stir shaft
The shafts operate up to 14,000 rpm, and they should be run in a counter-clockwise direction. Typical torque ratings — sharp bend in shaft, (4-inch loop): 4.7 Kg-cm, (4 in-lbs); Straight shaft: 28 Kg-cm, (24 in-lbs). Shafts measure approximately 91.4 cm, (36 inches) or 152.4 cm, (60 inches) with hand-piece and motor coupling attached.
Designed with a ball bearing motor coupling at one end for connection to any motor with an 8mm, (5/16-inch) diameter shaft. The other end has a detachable hand-piece with an 8mm round steel pin adapter for connection to chucks, (must be purchased separately). The hand-piece can be supported by a standard lab clamp, or hand held.
Información para pedidos: Complete units consist of either 91.4 cm shaft (89062-032) or 152.4 cm shaft (89062-034), motor coupling for 8mm motor shaft (89062-040), hand-piece with 1/4-inch collett and adapter (89062-038), chuck wrench with chained key (89062-042). Operating and lubrication instructions are also included. Optional adapter 89062-048 allows for connection to motors with 9.5mm (3/8-inch) O. D. shaft. All items may be purchased separately.