You Searched For: TLC Development Tanks

TLC development tanks are constructed of sturdy glass with beveled edges to eliminate sharp hazards. Clear sides offer an unobstructed view of the developing tank contents. Different tanks are available with lids in a variety of styles, including latch, nonslip, and standard variants. Plate size compatibility varies between different models, with development tanks offered in both rectangular and cylindrical formats with varied internal dimensions. Some rectangular models feature a raised edge along the inside bottom to allow for the simultaneous development of two plates.

TLC development tanks are constructed of sturdy glass with beveled edges to eliminate sharp hazards. Clear sides offer an unobstructed view of the developing tank contents. Different tanks are available with lids in a variety of styles, including latch, nonslip, and standard variants. Plate size compatibility varies between different models, with development tanks offered in both rectangular and cylindrical formats with varied internal dimensions. Some rectangular models feature a raised edge along the inside bottom to allow for the simultaneous development of two plates.


38  results were found

Sort Results

List View Easy View
SearchResultCount:"38"
Description: Size: 75mm x 125mm. Heavy wall borosilicate glass round tank. Can accommodate plate sizes up to 5cm x 10 cm. Supplied with [ST] 60/21 ground glass stopper.
Catalog Number: 14205-084
Supplier: SP Industries


Description: Plate Width x Length: 50mm x 100mm; Approxiamte Height: 120mm. Glass cylindrical developing chambers with flat bottom and molded plastic caps.
Catalog Number: 14207-016
Supplier: SP Industries


Description: Plate Width x Length: 25mm x 75mm; Approxiamte Height: 95mm. Glass cylindrical developing chambers with flat bottom and molded plastic caps.
Catalog Number: 14201-742
Supplier: SP Industries


Description: Latch lid. Sturdy, molded, clear-glass block. Flat surface walls. Ground lip of uniform flatness. Raised ridge midway on inside ends and bottom of jar. Develops two 20x20cm plates or equivalent simultaneously without rack. Inside dimensions: 27x7.6x25.7cm.
Catalog Number: 21432-703
Supplier: General Glass Blowing


Description: Sturdy, molded, clear-glass block. Develop two 20x20cm plates or equivalent simultaneously without rack. Chamber capacity approximately 4.2L. Inside dimensions: 27Lx7.5Wx26Hcm. Includes flat glass lid.
Catalog Number: 21432-739
Supplier: General Glass Blowing


Description: Heavyweight construction and ground flat bottom. Top lip of tank is also ground flat and beveled inside and outside to eliminate any sharp edges. Lid has handle for easy removal. Six-plate aluminum rack fits snugly in tank. Tank is 8.6cm in depth. Size: 10cm.
Catalog Number: 21432-841
Supplier: General Glass Blowing


Description: Cylindrical glass tank for the development of 2.54x7.6cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with polyethylene lid.
Catalog Number: KT416170-1119
Supplier: DWK Life Sciences (KIMBLE)


Description: Cylindrical glass tank for the development of 12.7x51cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with polyethylene lid.
Catalog Number: KT416170-1123
Supplier: DWK Life Sciences (KIMBLE)


Description: Cylindrical glass tank for the development of 5x10cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with polyethylene lid.
Catalog Number: KT416170-1120
Supplier: DWK Life Sciences (KIMBLE)

Description: Sturdy, molded, clear-glass block. Develop two 20x20cm plates or equivalent simultaneously without rack. Chamber capacity approximately 4.2L. Inside dimensions: 27Lx7.5Wx26Hcm. Includes Nonslip Lid, Internal fluoropolymer resin Shoulder.
Catalog Number: 21432-761
Supplier: General Glass Blowing


Description: Heavyweight construction and ground flat bottom. Top lip of tank is also ground flat and beveled inside and outside to eliminate any sharp edges. Lid has handle for easy removal. Six-plate aluminum rack fits snugly in tank. Tank is 6.4cm in depth. Size: 10cm.
Catalog Number: 21432-825
Supplier: General Glass Blowing


Description: TLC Tank Rack. fluoropolymer resin coated aluminum rack to fit either CG-1183 or CG-1184 TLC developing tank. Rack will hold six 20cmx20cmx1/8in. or twelve 20cmx20cmx1/16in. plates.
Catalog Number: 80060-620
Supplier: Chemglass

Small Business Enterprise


Description: Clear molded glass developing tank. Allows unobstructed photography or visual inspection of TLC plates. Latch Lid with PTFE retainers holds lid firmly to tank, drilled for #0 rubber stoppers for reagent pouring. Holds two 20x20cm, or four 5x20cm Plates.
Catalog Number: KT416190-0000
Supplier: LABCONCO CORPORATION MX


Description: Heavy glass construction. Stainless steel latching device holds the ground glass surfaces of the lid and tank firmly in place. Interior dimensions: 27Lx7Dx27Hcm. Includes glass developing tank, latch-lid with hardware, equilibration latch-lid and multiplate rack.
Catalog Number: 21432-706
Supplier: General Glass Blowing


Catalog Number: 21432-336
Supplier: General Glass Blowing


Description: Latch Lid-Tank, Complete. Heavy duty, molded TLC developing tank for use with plates up to 20x20cm (8in.x8in.). The weight of the tank is approximately 15 pounds and the bottom is ground to insure stability.
Catalog Number: 80060-612
Supplier: Chemglass

Small Business Enterprise


1 - 16 of 38